SINGER

COULING

Sewing Machine Foot - Rolled Hem Hemmer Foot Standard (Clip Snap on)

    Rolled Hem Hemmer Foot Standard (Clip Snap on) This is a Universal type Foot Supplied by Couling The Hemmer Foot, sometimes referred to as the Rolled Hemmer is used to stitch the narrow rolled hems usually found on shirt tails, table...

COULING

Sewing Machine Foot - Roller Foot for Vinyl Velvet Suede Leather (Clip Snap on)

Metal Open Toe Craft Applique Foot (Clip Snap on) This is a Universal type Foot Supplied by Couling The textured rollers on this foot give you more control and cause less friction between the foot and feed dog while sewing or quilting on leather,...

COULING

Sewing Machine Foot - Satin Stitch Foot Clear (Clip Snap on)

Satin Stitch Foot Clear (Clip Snap on) This is a Universal type Foot Supplied by Couling The satin stitch foot is for decorative type stitches that are very dense. This foot has a deeper channel down under it for the thicker stitches to pass through...

COULING

Sewing Machine Foot - Straight Stitch Foot (Clip Snap on)

    Straight Stitch Foot (Clip Snap on) This is a Universal type Foot Supplied by Couling This foot is ideal for projects where straight stitching is required, this helps especially with delicate fabrics that need pressure applied to stop...

COULING

Sewing Machine Foot - Teflon Ultra Glide Foot (Clip Snap on)

Teflon Ultra Glide Foot (Clip Snap on) This is a Universal type Foot Supplied by Couling The ultra glide foot is molded from a special resin allowing easier sewing of fabrics  that may otherwise stick to the standard metal foot such as...

COULING

Sewing Machine Foot - Narrow Slim Zipper Double Sided Foot (Clip Snap on)

Narrow Slim Zipper Double Sided Foot (Clip Snap on) This is a Universal type Foot Supplied by Couling   The Ultra Slim Line Zipper foot is the same size as the standard sewing machine foot shank. Depending on the type of zipper...

SINGER

Singer Needle Threader Lever Spring - Brilliance, Confidence, Starlet 6660 - 74050000

    Singer Needle Threader Lever Spring Fits models: Brilliance, Confidence, Starlet 6660 Part Number: 74050000

SINGER

Singer Spool Pin Cotton Holder Stepped End Long - 324 Featherweight

Singer Spool Pin Cotton Holder Vertical push in spool pin stepped end type. Approximately 8.2cm long. Just tap the tapered end into the hole in the top of the machine. Fits Singer 324 Featherweight. Part Number: 74170000

COULING

Sewing Machine Foot - 1/4" Clear Narrow Seam Quilting Foot NO Guide (Clip Snap on)

    1/4" Narrow Clear Plastic Seam patchwork Foot with red marking - NO GUIDE This is a Universal type Foot Supplied by Couling A popular foot with patchworkers for that essential ¼" seam.  Horizontal red line matches...

COULING

SINGER FOOT HOLDER - NEW TYPE LOW SHANK - For Clip on feet

    NEW TYPE SINGER FOOT HOLDER SHANK - LOW SHANK FITTING   This is the standard screw on type low shank so your machine can take clip on feet    

HOBBYGIFT

Sewing Machine Dust Cover - Strong White PVC - Standard Size

    Standard Size Sewing Machine Dust Cover Approx.  L40 x W15 x H29cm (L16" x W6" x H11" inchs) Strong PVC Construction Protection against Dust, Grease, Sunshine etc Thicker then most standard dust covers Standard Size to...

SINGER

Set of 5 Singer Sewing Machine Base Rubber Feet Older 222k 411G 431G

    Fits Most Older Singer Machines you can see by the pictures if your singer machine bottom looks the same then they will fit. Normally when 5 feet are needed, 4 are on the machine base and 1 is on the removeable small table  For old...

COULING

Singer Needle Clamp 15K Body and Screw - 2054, 522R

Singer 15K Complete Needle Clamp - Body and Screw Fits the following models: 2054, 522R  

SINGER

Singer Slide Plate Bobbin Cover - 7140 Symphonie 6 - 416565401

    Singer Slide Plate/Bobbin Cover Clear plastic for clear visibility to the bobbin so you can see how much thread you have left before it runs out. It clips or slides into place and covers the bobbin to stop it jumping out, without...

COULING

Sewing Machine Foot - Free Motion Embroidery Quilting Foot (Screw on)

    The Most Common Standard Free Motion Embroidery Quilting Foot (Screw on Type) NOTE: This Darning Foot is for Low Shank Machines only.  This is a Universal type Foot Supplied by Couling Use it for: free motion...

UNBRANDED

Industrial Rotary Hook Metal Bobbin Case (Anti Bobbin Spin) Brother Singer Juki Consew

Standard Type Industrial Metal Bobbin Case with Back Lash (anti bobbin spin spring) This bobbin case will fit Brother, Singer, Juki, Toyota, Wilcox & Gibbs Etc. Industrial Sewing Machines.  It will not fit Domestic Home sewing...

SINGER

Singer Fixed Spool Pin Cotton Holder 9910, 9920, 9940, 9960, 9970, 8060

 Singer Fixed Spool Pin Cotton Holder  This is the Standard fitted spool pin which is fixed to the top cover, for fitting the cover/covers must be removed. The spool pin fits the following models: 9910, 9920, 9940, 9960, 9970, 8060 Part...

SINGER

Singer Slide Plate Bobbin Cover - Fasion Mate 3333 3342 3337 Simple 3337 M3220 - 68003566

  Singer Slide Plate/Bobbin Cover Clear plastic for clear visibility to the bobbin so you can see how much thread you have left before it runs out. It clips or slides into place and covers the bobbin to stop it jumping out, without this...

SINGER

Singer Presser Bar Lifter Lever - Heavy Duty, Tradition, Fashion Mate +

Singer Presser Bar Lifter Lever   Heavy Duty HD4423 5523 6335M 4411, Tradition 2277 2250 2259 2263 2273 2282 , Simple 2282 3221 3223 3232 3221 Fashion Mate 3223, 3229, 3333, 3337, 3342 Part Number: 416466901

COULING

Premium Sewing Machine Wooden Base Rubber Feet and Screws (4pk)

Premium Sewing Machine Wooden Base Rubber Feet and Screws (4pk)   4x base rubbers with built in metal washer. (22mm/1" x 10mm for Screw Head hole 8mm washer Hole Dia: 3mm) 4x pan head wood screws - Pozi 3.5 x 20mm Rubber cushions...