Bobbin Winders and Parts

JANOME

JANOME Bobbin Winder Rubber 30.5x17x7mm Fits Most Janome Machines

 JANOME Bobbin Winder Rubber - Size MED/LARGE  Fits just about all Janome machines, double check your bobbin winder wheel size should be approx 20mm for this rubber to fit OUTER DIA APPROX -      30.5mm INNER DIA APPROX...

JANOME

JANOME Bobbin Winder Rubber 660 Jem Gold, 661 Jem Gold 2, JP720, JP760

 JANOME Bobbin Winder Rubber - Size Special Small with 2 bulges Only fits machines listed, this is not a standard rubber 660 Jem Gold, 661 Jem Gold 2, 662 Jem Silver, 665 Jem Gold 3, JP720, JP760 Plus Models below AQS2009, Hello Kitty 3/4,...

JANOME

JANOME Sewing Machine Bobbin Winder Spindle SPRING Only - Pin Clip Spring Wire

JANOME Sewing Machine Bobbin Winder Spindle SPRING Only - Pin Clip Spring This is the small spring clip that clips into the Winder Unit Shaft Spindle Spring which holds the bobbin in place when winding  Part No...

COULING

1/4" Sewing Guide Adhesive Tape, Diagonal Lines - 10m

1/4" Sewing Guide Adhesive Tape, Diagonal Lines - 10m   The red line in the center is aligned with the needle of your machine, and the lines on either side are 1/4 inch to each side from the center of the lines, to represent a 1/4 inch seam...

JANOME

Janome Bobbin Winder Stopper 525s 725s DC3050 DXL603 + 735016307

 Janome Bobbin Winder Stopper   This is the most common bobbin winder stopper for the Janome models, but it does not fit them all, only machines which take this part number   This part is held on by a screw and nut (not...

JANOME

Janome Bobbin Winder Base Spindle Cutter - DKS30 MC9900 AT6 MC9450QCP MC550E M7

      Janome Bobbin Winder Base Spindle Cutter Holder Unit Fits the models listed with the 3 prong cutter base DKS30/MC9900/AT6/MC9450QCP/MC550E/M7 Genuine Janome Part - 809619009

JANOME

Janome Bobbin Winder Base Spindle Cutter - MC15000 Atelier 3,5,7,9 MC8900QCPSE MC9400QCP MC8200QCSE MC14000 MC500E MC400E

      Janome Bobbin Winder Base Spindle Cutter Holder Unit Fits the models listed with the 5 prong cutter base MC15000/Atelier 3,5,7,9 /MC8900QCPSE/MC9400QCP/MC8200QCSE/MC14000/MC500E/MC400E Genuine Janome Part - 862647001

JANOME

Janome Bobbin Winder Stopper, Screw, Washer & Nut Set

 Janome Bobbin Winder Stopper   This is the most common bobbin winder stopper for the Janome models, but it does not fit them all, only machines which take this part number   This part is held on by a screw and nut (not...

JANOME

JANOME Bobbin Winder Unit - NO Arm CXL301 8077 DC3050 DC4100 725s JLX2000 - 827506008

Janome Bobbin Winder Unit Janome have two bobbin winder units with the same part number 827506008 so you need to view both parts and double check if your unit has a extra plastic leg/arm coming out the side, you cannot just go by the part numbers...

JANOME

JANOME Bobbin Winder Unit - 525s 7025 521 2522 659 - 652506000

    Janome Bobbin Winder Unit This winder unit will only fit the Janome machines listed below or that take this Part No. Genuine Janome Part No. 652506000 7025/652/654/658/2522/659/525S/5050/JL150/JL250/DEXHD   Elna Models2600,...

JANOME

JANOME Bobbin Winder Unit - New Style JL110SE 219S 217S 216S - 311503001

    Janome Bobbin Winder Unit This winder unit will only fit the Janome machines listed below which fits onto a white plastic block or that take this Part No. Genuine Janome Part No. 311503001 New Style JL110SE 219S 217S...

JANOME

JANOME Bobbin Winder Unit - J3-18 J3-24 2200XT 2032 JL110 - 735501005

    Janome Bobbin Winder Unit This winder unit will only fit the Janome machines listed below or that take this Part No. Genuine Janome Part No. 735501005 JD1714-1822/2039/2041/1550 1560 1570 1571 1575 1580...

JANOME

JANOME Bobbin Winder Unit - With Arm CXL301 8077 DC3050 DC4100 725s JLX2000 - 827506008

    Janome Bobbin Winder Unit with back arm Janome have two bobbin winder units with the same part number 827506008 so you need to view both parts and double check if your unit has a extra plastic arm/leg coming out the side, you cannot...

HEMLINE

Free Standing Bobbin Winder Unit + Stand with Automatic Stop Sensor 4919

Free Standing Bobbin Winder Unit & Stand with Automatic Stop Sensor    Also a great idea for winder bobbins to use on older machines which the winder unit may have failed  Hemline's automatic bobbin winder is designed for a wide...