Overlocker Parts

JANOME

Janome Overlock Needle Clamp SCREW - 8002D 9100D 9200D 9300DX - 888264000

    Janome Overlock Needle Clamp SCREW -  This will fit most of the Janome Overlockers but not all 9300DX, 8002D, 8002DX, DM234 (Not 234d See other listing for the 234 Screw) 9102D, 9200D, 3000P Air thread AT2000D 734D, 744D...

JANOME

Janome AT2000 Overlock Upper Knife Blade Holding Hex Head SCREW Airthread - 000253608

Janome AT2000 Overlock Upper Knife Blade Holding Hex Head SCREW Airthread - 000253608 Part No. 000253608 Genuine Janome Part  

JANOME

Janome Overlock Thread Cone Holder + 8002D AT2000D HD9 1600p

Janome Overlock Thread Cone Holder This is the standard thread holder hold for the full range of Janome overlockers including some listed below Genuine Part No. 784223105 Guaranteed to fit Janome Models:Cover Pro Machines - 1000CP, 1000CPX Cover...

JANOME

Janome Overlock Upper Knife Blade Holding Hex Head SCREW - 624303008

    Janome Overlock Upper Knife Blade Holding Hex Head SCREW - Fits just about all Janome Overlockers Part No. 624303008 Genuine Janome Part  

JANOME

Janome Overlock Needle Clamp SCREW - 6234XL 644D 634D 434D 134D 234 - 785008024

    Janome Overlock Needle Clamp SCREW -  644D 634D 434D 334D 134D 204D 504D 234D (Not DM234 See other listing for the DM234 Screw) 6234XL (please double check with the photo as there are 2 versions for this model) This will fit...

JANOME

Janome Overlock Needle Clamp Body HOLDING SCREW 134 234 434 634 644D - 785026017

    Janome Overlock Needle Clamp Body HOLDING SCREW 134D MyLock, 204D MyLock, 234, 234D, 304D, 334, 334D, 434D, 504D MyLock, 534, 534D, 634D MyLock, 644D This is the small black holding/fixing screw for the needle clamp body 785004020...

JANOME

Janome CoverPro Needle Clamp SCREW - 1000CP, 1000CPX, 2000CPX - 795138003

Janome CoverPro Needle Clamp SCREW    For the Janome Coverpro range / cover stitch machines   1000CP, 1000CPX, 2000CPX Part No. 795138003 Genuine Janome Part  

JANOME

Janome Overlock Lower Knife Blade Holding SCREW - 000102209 x2

    Janome Overlock Lower Knife Blade Holding SCREWS Set of 2 Screws Small Special Counter Sunk Heads Fits just about all of the janome overlocker machines including the Mylock range 8002D, 8002DX, 8002DG, 9200D, 9300DX, 6234XL + Part No...

JANOME

Janome Base Rubber Foot 1600p & Most Overlockers - 784135006

    Janome Base Rubber Foot only (no fixings) Fits the 1600p & just about all the Janome Overlockers    Genuine Part - No. 784135006    

HEMLINE

Extra Long Needle Threader and Looper Threader Overlocker

Extra Long Needle Threader and Looper Threader Extra long needle threader and fine looper threader for sewing machines and overlockers. Comes with plastic tube cover to protect the looper end.  

JANOME

Janome Overlock Upper Looper Wire Spring Thread Guide 6234XL 8002D 9200D 9300D 634D + 784077009

    Janome Overlock Upper Looper Spring Wire Thread Guide Fits just about all of the Janome overlocker models, some listed below, you must be very careful when fitting as this needs to be set correctly or it may spring off, just a push fit...

JANOME

Janome Overlock Metal Thread Guide 8002D 8002DG DM234 + 792020002

    Janome Overlock Metal Thread Guide 8002D 8002DG DM234 Fits only a select few Janome overlockers which has this double guide fitted for the loopers be hide the spring flap door Some models listed - 8002D, 8002DG  DM234 Genuine...

JANOME

Janome Overlocker Lower Crank SCREW 6234XL 9200D 9300DX 8002D + 787108009

Janome Overlocker Lower Crank SCREW  Fits into a ball joint which move the loopers   6234XL 9200D 8002D 8002DG 9002D, 9102D, 9300DX, 204D, 504D, 634D, 644D, 7034D, 7933 Harmony, 8933D, Genuine Janome Part 787108009

JANOME

Janome Overlock Black Metal Fixed Needle Guide 8002D DM234 9200D 6234XL + 788019005

Janome Overlock Black Metal Fixed Needle Guide Fits Most Janome overlockers, you will find this under the needle plate to guide the needles to the loopers and to help form the loop in the thread for the looper to catch  Some models listed...

JANOME

Janome Overlock Wheel Screw & Spring Washer 6234XL 9300DX 8002D DM234 +

Janome Overlock Balance / Hand Wheel Screw & Spring Washer Genuine Janome Part No. 618070004 556047007   To Fit all Janome/Elna overlockers which take this large wheel screw/spring...

JANOME

Janome Overlock Chaining Stitch Finger 8002D 9200D 9300DX DM234 204D Elna 664

Janome Overlock Chaining Stitch Finger 634D/644D/9102D/9200D/9300DX 504D/204D/8002D/800DG/DM234 + Elna 644 Genuine Janome Part No. 788017003  

JANOME

Janome Overlock Needle Clamp BODY ONLY 134 234 434 634 644D - 785004020

    Janome Overlock Needle Clamp BODY Only (we also sell the holding screw and needle screws) 134D MyLock, 204D MyLock, 234, 234D, 304D, 334, 334D, 434D, 504D MyLock, 534, 534D, 634D MyLock, 644D This will fit some of the Janome...

JANOME

Janome Overlock + AirThread AT 2000D Extra Long Threading Wire 799803008

    Janome Overlock + AirThread AT 2000D Extra Long Threading Wire  Helps to pass the looper thread through Genuine Janome Part  Part No. 799803008 For The Janome AT2000D AirThread + All Overlockers   

JANOME

Janome CoverPro Needle Bar COMPLETE Clamp + Screws - 1000CP, 1000CPX, 2000CPX - 796602006

Janome CoverPro Needle Bar Complete Clamp Unit with Screws   For the Janome Coverpro range / cover stitch machines   1000CP, 1000CPX, 2000CPX Part No. 796602006 Genuine Janome Part  

JANOME

JANOME OVERLOCK PIPING FOOT 3/16" - Category B-E

JANOME OVERLOCK PIPING FOOT 3/16" If ready made piping is not available or if you just want to make your own, the piping foot is ideal, making the task quick and easy. Foot size is 3/16 Inch. Piping creates a professional finish and provides...