Screwdrivers, Allen Keys, Screw and Nuts

SINGER

SINGER Overlocker Holding SCREW For Lower Blade Knife 14U 14SH 14HD +

  SINGER Overlocker Screw - Holds the lower blade/knife in place, only fits the lower blade with the hole in the middle Genuine Part Number 0544211051 14U MODELS  544, 554, 555, 557

SINGER

Singer Vintage Old Type Needle Plate SCREW - 66k 99k 201k 221k +

1x  Needle Plate SCREW to fit most older Vintage Singer Sewing Machines   15k, 66k, 99k, 201k, 221

COULING

Singer Overlocker Needle Clamp Screw - Allen Key Hex - S14-78 ONLY

  Singer Overlocker Needle Clamp Screw - Allen Key Hex - S14-78 ONLY This Small Allen Key Hex Head is for the small Needle Clamp Screw which holds the needle in place  

SINGER

Singer Needle Plate SCREW - 6038 2950, 5160, 5400 (Old Version) 358138451

Singer Needle Plate SCREW - 6038 2950, 5160, 5400 (Old Version)  Part Number: 358138451 358138-451

SINGER

Singer Overlocker Upper & Lower Blade HOLDING SCREW - S14-78 ONLY

 Singer Overlocker Securing Screw which fits both the upper and lower blades S14-78 ONLY Phillip Pan head fitting   Singer Part No. 416121501

SINGER

Singer Overlock Needle Plate SCREW - 14U 14SH 14HD RANGE 14HD845 14SH754 14U554

Main Standard Needle Plate SCREW for the Singer Overlock 14U 14SH  14HD RANGE 14HD845 4CG744, 14CG754, 14SH644, 14SH654, 14SH744, 14SH754, 14SH764, 14U544, 14U554, 14U555, 14U557, 14U234 Genuine...

SINGER

Singer Overlocker Foot Shank Holder SCREW - 14HD854, 14SH754, 14U32A, 14U

 Singer Overlocker Foot Shank Holder SCREW  Singer Heavy HD Models 14SH, 14T, 14CG, 14J Series Models  14HD854, 14SH754, 14HD0405S

SINGER

Singer Presser Foot Shank Holder SCREW Most Common - Heavy Duty, Tradition, Basic +

Standard Singer Presser foot shank SCREW   Most common type fits just about all the new singer range, only a few models listed below    HD, Heavy Duty, Basic, Promise, Start, Tradi

SINGER

Singer Needle Plate SCREW - Simple, Promise, Heavy Duty 3709 2250 1408 +

Singer Metal Needle Plate SCREW Designed to fit needle plates for Singer Sewing Machine model numbers:

SINGER

Singer Needle Clamp Thread Guide Wire - Some Confidence 7470 +

    Singer Needle Clamp Thread Guide Wire  Will Fit Some Confidence Machines which have this part, fixed on behind the main clamp Confidence - 7442, 7444, 7446, 7462, 7463, 7464, 7465, 7466,...

SINGER

Singer Overlock Needle Clamp - NEEDLE SCREW x1 - 14SH654 14SH754 14HD854

Singer Overlock Needle Clamp - NEEDLE SCREW x1 -  14SH654 14SH754 14HD854   Small grub screw which holds the needle securely, normally you will have two needles & two screw needed if missing Screw...

SINGER

SINGER Overlocker Holding Hex SCREW For Upper Blade Knife 14U 14SH 14HD +

    SINGER Overlocker Hex Head Screw - Holds upper blade/knife in place Genuine Part Number 0544407000 14U MODELS  544, 554, 555, 557

SINGER

Singer Foot Holder SCREW For C440 Legacy, EM200 Quantum Stylist Superb, SE300, SE340

    Singer Foot Holder SCREW For C440 Legacy, EM200 Quantum Stylist Superb, SE300, SE340  

COULING

Sewing Machine Service Screwdriver - Small Flat Plate Driver for Needle Plate Screws & Needle Clamp

    Standard Flat Plate Screw Driver For easy removal of the needle plate screws also used on the needle clamp screw

COULING

Sewing Machine Service Screwdriver - Small Flat L Plate Driver for Needle Plate Screws & Needle Clamp

    Standard Flat Plate Screw Driver L Type For easy removal of the needle plate screws also used on the needle clamp screw

COULING

Screwdriver Set - Needle Plate Screw & Bobbin Case Tension Screw 416427101

  Screwdriver - Small Wing Shaped Handle for needle plate screws Full Size -  6.7cm (67mm) Long (2"3/4)  White handle size 3.3cm (33mm) Fits Nicely into the Fron

SINGER

Singer Overlocker Needle Clamp Screw Hex - S14-78 ONLY

 Singer Overlocker Needle Clamp Screw - Hex - S14-78 ONLY Small grub screw which holds the needle securely, normally you will have two needles & two screw needed if missing Screw head is a small...

HEMLINE

Extra Long Needle Threader and Looper Threader Overlocker

Extra Long Needle Threader and Looper Threader Extra long needle threader and fine looper threader for sewing machines and overlockers. Comes with plastic tube cover to protect the looper end.  

COULING

Deluxe Bent Tweezers For Overlockers and Sewing Machines Stainless Steel

 Standard Tweezers with side finger grips and tip grip   Black Coated Stainless Steel   Tweezers are a great tool to have and also allow you to thread your overlocker with ease and remove any...

COULING

Sewing Machine Service Screwdriver 2 SET Stubby Short For Needle Plate Screws etc

    Great Little/Mini Stubby Short screw Driver Set Set of 2 1 Cross Head 1 Flat Head Great Grip Mini Handles Perfect for the tight spaces