Overlocker Parts

JANOME

Janome Overlock UPPER TOP KNIFE BLADE 8002DX 9102D 9200D 9300DX DM234 204D + 788127007

    Janome Overlock UPPER KNIFE BLADE  Air Thread AT 2000D  Genuine Janome Part  Part No. 788127007 (788011007)  SMD 222D, 204D, 80

JANOME

Janome Overlock UPPER KNIFE BLADE 504D 644D - 790005005

    Janome Overlock UPPER KNIFE BLADE  Genuine Janome Part  Part No. 790005005 Suitable for models 504D and 644D

JANOME

Janome Overlock Needle Plate 6234XL 9200D 9300DX 8002D DM234 DMX34L +

    Janome Overlock Needle Plate Genuine Janome Part No. 788601000 To Fits 634D/644D/6234XL/9102D/9200D/9300DX/DMX34L 504D/204D/8002D/800DG/DM234 (not 234)  

JANOME

Janome Overlock UPPER TOP KNIFE BLADE 634D 6234XL 888 COMPULOCK + 788011007 - NLA

  This item has been discontinued and is no longer available. Janome state to use the newer version 788127007 (Click here)   Janome

BROTHER

Brother Overlock + AirFlow Extra Long Fine Threading Wire - XB4370001

Brother Overlock + AirFlow Extra Long Fine Threading Wire For The Brother AirFlow/AirThread + All Overlockers  Helps to pass the looper thread through Part No. XB4370001 Genuine Brother...

JANOME

Janome Overlock Needle Plate 134D + From 234 to 334D - 785609009

    Janome Overlock Needle Plate Genuine Janome Part  Part No.  785609009 To Fits the 134D + Models From 234 to the 334D  

JANOME

Janome Overlock Needle Plate 744D 734D - 794601009

    Janome Overlock Needle Plate Genuine Part - No. 788601009 Janome made this plate to fit the 744D & 734D Overlockers  

JANOME

Janome Overlock ROLLED HEM Needle Plate MyLock 134D 304D 234D 334D - 784626009

    Janome Overlock ROLLED HEM Needle Plate with a R stamped on the back Genuine Part - No. 784626009 Janome made this Rolled Hem plate to fit the Older MyLock 134D 304D 234D 334D Overlockers  

JANOME

Janome Overlock Needle Plate AirThread AT 2000D 799601004

    Janome Overlock Needle Plate AT2000D Genuine Janome Part  Part No. 799601004 To Fit AT2000D AirThread Only  

JANOME

Janome Overlock Needle Plate 434D 534D - 787601007

    Janome Overlock Needle Plate for the older 434D 534D Only Part No. 787601007    

JANOME

Janome Overlock Needle Plate ML454D & ML654D

Janome Overlock Needle Plate Fits the New MyLocks - ML454D & ML654D Only Part No. 779601002    

JANOME

Janome Overlock Lower Looper 6234XL 8002D 9200D 9300D 634D - 784083606

    Janome Overlock Lower Looper  Fits just about all of the Janome overlocker models, some listed below, you must be very careful when fitting as this needs to be set correctly for the timing of...

JANOME

Janome Overlock Thread Spool Stand - 204D 6234XL 8002D 9200D 9300DX

Janome Overlock Rear Thread Spool Stand (fixed to the rear) For Janome Models 1000CP CoverPro, 1000CPX CoverPro, 2000CPX CoverPro, My Lock 134D, 204D to 504D, 644D, 7034D, 734D, 744D, 7933...

JANOME

JANOME OVERLOCK ELASTIC GATHERING ATTACHMENT - 202037008 - CATEGORY D

  JANOME OVERLOCK ELASTIC GATHERING ATTACHMENT - 202037008 - CATEGORY D. Stitching on elastic can sometimes be a little tricky especially when you have to stretch your elastic to size. The...

JANOME

JANOME OVERLOCK CORDING FOOT A - 202034005 - Category A-E

JANOME OVERLOCK CORDING FOOT A If your overlocker is equipped with a rolled hem facility then you can make great use of the Cording Foot A. Cording Foot A is ideal for bridal and evening wear and...

JANOME

Janome Overlock Standard Foot Sole 204D DM234 6234XL 8002D 9102D 9200D 9300DX

Janome Overlock Standard Foot Sole 204D DM234 6234XL 8002D 9102D 9200D 9300DX  This foot SOLE will only fit the following Janome Overlockers:  134d 204d 434D 504d 634d 644d 734D 744d 6234XL 8002D...

JANOME

Janome Overlock Waste Trim Box - ML454D & ML654D Only

  The waste bin  is installed at the bottom of the overlocker under the sliding cover.This way, thread and fabric scraps fall directly into the plasticwaste bin.

JANOME

Janome Overlock Waste Trim Box - 204D, 8002D, 9102D, 9200D, 9300DX +

  The waste bin  is installed at the bottom of the overlocker under the sliding cover.This way, thread and fabric scraps fall directly into the plasticwaste bin.

JANOME

Janome Overlock Standard Foot Holder Shank 6234XL 8002D 9102D 9200D 9300DX

Janome Foot Holder for the snap on overlock feet.  This foot holder will only fit the following Janome Overlockers:  204d 504d 634d 644d 744d 6234XL 8002D 9102D 9200D 9300DX Part No. 787541008

JANOME

Janome Overlock LOWER KNIFE BLADE 103 104 203 304 334D 134D 234D etc - 784048001

    Janome Overlock LOWER KNIFE BLADE  Genuine Janome Part  Part No. 784048001 To Fits the 103 104 203 304 334D 134D 234D etc -  + Models From 103 to the 334D (NOT THE 204D) We always rec