Janome 360DC LE Sewing Machine

Feet & Accessories – Category B

Sew all types of projects with a great selection of 60 stitches. Fully computerised with stitches and settings at the touch of a button. This model has lots of easy to use features which make sewing a pleasure and with an aluminium die cast body you can be assured of Janome’s robust build quality.

Perfect for beginners and more experienced sewists, with an auto needle threader, smooth feeding of fabric, lock stitch to finish off all your ends and a hard cover for storage.

NEW MODEL FEATURES

Easy set bobbin case and cover: 

There's no need to pull long thread tails up when you first thread the machine. Slip the bobbin thread in the cover plate guide; the built-in cutting blades trim the tail to the correct length for a super­clean start to your stitching. After the initial threading, the auto thread cutter takes care of trimming and re-setting the tails each time. 

Presser Foot Pressure Sensor: 

It's easy to forget to lower the presser foot when starting to sew. The sensor ensures the machine will not stitch until the presser foot is lowered and helps eliminate thread tangles.

Thread cutter under-bed: (Scissors button): 

Press the thread cutter button to cut the top and bottom threads after sewing. You can continue sewing without pulling the bobbin thread up after trimming the threads.

Make the right choicefirst time!

753801004 Automatic Buttonhole Foot (R)

822804004 Satin Stitch Foot (F)

825817009 Blind Hem Stitch Foot (G)

653802002 Screwdriver (3 Pronged)

Bobbins x 4 (Plastic)

200133009 Seam Ripper

808401003 Extension Table (16” x 11”)

829803004 Spool Base

C-1036 Foot Control

822019004 Spool Cap (Small)

802424004 Lint Brush

822020307 Spool Cap (Large)

Needles

625031005 Spool Pin (Spare)

822801001 Overedge Foot (C) with brush

102403109 Spool Pin Felt

830315008 Power Cable

832523007 Standard Foot (A) (Black Button)

808852003 Zipper Foot (E)