Screwdrivers, Allen Keys, Screw and Nuts

BERNINA

ALLEN KEY for Bernina Overlock Needle Clamp Screw Hex Head L450, L460

1 ALLEN KEY for the Bernina Overlock Needle Clamp Screw Hex Head that's in the models L450, L460    

BERNINA

Bernina Machine Front Plastic Pin for Sew Table Fixing 1008 1000 1015 1630 +

    GENUINE BERNINA PIN - Push Fits into the front of your machine This Small white plastic pin is fitted into the front of your machine near the bottom middle for securing the sew table into place Push in type fitting, if your old pin is...

BERNINA

Bernina Overlock Needle Clamp SCREW - L450, L460, B68

    Bernina Overlock Needle Clamp SCREW  1 standard small needle clamp screw hex head type L450, L460 also the Bernette B68 Maker Airlock Combination Overlocker/Coverstitch This is a Genuine Bernina Part Part No. 5020700395

BERNINA

Bernina Balance Wheel Release Screw 1008 + 21721283

Bernina Balance Wheel Release Screw 1008 +    Self tapping screw for the plastic balance wheel centre locking wheel to stop the inner unscrewing fully Genuine Bernina Part 21721283 

BERNINA

Bernina Needle Plate Spring Clip SCREW - 20500223

Bernina Needle Plate Spring Clip SCREW 100% Genuine Bernina Part 20500223 1x Small SCREW which fixes the small spring clip onto the needle plate bottom   FITS BERNINA'S Activa 130 / 140,   Artista 180 / 180, 200 RICCAR /...

BERNINA

Bernina Sew Table Locating Pin New Style Table 1008 1000 1015 1630 +

    GENUINE BERNINA LOCATING PIN - the pin has a slight flat to one side FOR NEW TYPE SEW TABLE, push in type fitting, if your old pin is snapped flush with your table, drill out with a smaller bit or push out from the other end BERNINA...

BERNINA

Bernina Overlock Needle Clamp SCREW - 800DL 1100 1150

    Bernina Overlock Needle Clamp SCREW 1 standard small needle clamp screw flat slot type 009 FUNLOCK, 800DL, 1000DA, 1100, 1150MDA, 1300DC, 2000, 2500DCET.   This is a Genuine Bernina Part Part No. A1416777000 5020105412

BERNINA

Bernina Sew Table Metal Locating Screw Pin Some 1008 1000 1015 1630 +

    Bernina Sew Table Metal Locating Pin Screws into the back free arm lower cover to support the table, normally they will also have a plastic push in pin on the front of the machine which we also stock Genuine Part No. 0001955100

BERNINA

Bernina Face Plate Flat Spring Clip Catch 730 807 808 830 930 Record +NLA

No longer available from Bernina.    Bernina Face Plate Flat Spring Clip  1 Spring clip / catch which fits on the left side top of the machine which holds the face plate door (see photos) This will fit many of the older bernina...

BERNINA

Bernina Base Rubber Foot - 1008, Activa 125 230 330 440QE +

    Bernina Base Rubber Foot (Standard Type) Normally has 3, the 4th maybe a adjustable which we also sell New type base rubber for the older Bernina Machines Plus machines listed below. Just a push and twist fitting into the base...

COULING

Sewing Machine Service Screwdriver - Small Flat Plate Driver for Needle Plate Screws & Needle Clamp

Standard Flat Plate Screw Driver For easy removal of the needle plate screws also used on the needle clamp screw

COULING

Sewing Machine Service Screwdriver - Small Flat L Plate Driver for Needle Plate Screws & Needle Clamp

    Standard Flat Plate Screw Driver L Type For easy removal of the needle plate screws also used on the needle clamp screw

COULING

Screw Driver Set - Needle Plate Screw & Bobbin Case Tension Screw 416427101

  Screw Driver - Small Wing Shaped Handle for needle plate screws Full Size -  6.7cm (67mm) Long (2"3/4)  White handle size 3.3cm (33mm) Fits Nicely into the Front Accessories Box Short Handle Screwdriver is designed to remove the...

HEMLINE

Extra Long Needle Threader and Looper Threader Overlocker

Extra Long Needle Threader and Looper Threader Extra long needle threader and fine looper threader for sewing machines and overlockers. Comes with plastic tube cover to protect the looper end.  

COULING

Deluxe Bent Tweezers For Overlockers and Sewing Machines Stainless Steel

 Standard Tweezers with side finger grips and tip grip   Black Coated Stainless Steel   Tweezers are a great tool to have and also allow you to thread your overlocker with ease and remove any remaining pieces of thread from the machine...

BERNINA

Bernina Needle Plate Spring Clip 140 180 220 330 550 590 New 7 Series

Bernina Needle Plate Spring Clip (screw not included) 100% Genuine Bernina Part 1x Spring clip which fits on the bottom of the needle plate to clip into place (screw not included)   FITS BERNINA'S Activa 130 / 140,   Artista...

BERNINA

Bernina Screwdriver for adjusting the small bobbin case tension screw

    Bernina Screwdriver for adjusting the small bobbin case tension screw on all of there machines Genuine Bernina Part 0328465000

BERNINA

Bernina Base Rubber Foot - Old Type 707 730 807 +

 Bernina Base Rubber Foot  Older type base rubber for the older Bernina Machines like the 707 730 807 830 etc Only fits the older bernina machines which take a push and twist fitting into the base hole, they must already take this...

COULING

Sewing Machine Service Screwdriver 2 SET Stubby Short For Needle Plate Screws etc

    Great Little/Mini Stubby Short screw Driver Set Set of 2 1 Cross Head 1 Flat Head Great Grip Mini Handles Perfect for the tight spaces 

COULING

Sewing Machine Service Tool Kit Mini 5 Pcs Screwdrivers + Small Brush

Basic Service and Repair Tools - 5 pcs set Package include:1 X Medium Sewing Screwdriver 1 X Small Sewing Screwdriver 1 X Flat Needle Plate Driver 1 X Compact Cleaning Brush - 1 x Includes Seam Ripper Part Number: CSMSER4