UNBRANDED

RED FELT Fits All Sewing Machines x 2

      2 Standard Red Felts for using on spool pins to protect your machine surface.

JANOME

Janome Sewing Machine Needle Threader SMALL SCREW - 000102807 - MC11000 MC11000SE MC10001 MC10000

    Janome Sewing Machine Needle Threader - SMALL SCREW  This is the very small set screw which holds the thread in place onto the threader bar TO SECURE THREADER PART NO. 850508002 IN PLACE its best to remove the needle...

JANOME

Janome Sewing Machine Needle Threader SMALL FIXING SCREW - 000230403

    Janome Sewing Machine Needle Threader - SMALL FIXING SCREW  This is the very small set screw which holds the thread in place onto the threader bar TO SECURE THE 2 PART THREADER PART NO. 862626004 IN PLACE on...

JANOME

Janome Sewing Machine Needle Threader SMALL FIXING SCREW - 000105501

    Janome Sewing Machine Needle Threader - SMALL FIXING SCREW  This is the very small set screw which holds the thread in place onto the threader bar Janome Needle Threader small Screw 000105501 to secure 734515009 to machine ...

BERNINA

ALLEN KEY for Bernina Overlock Needle Clamp Screw Hex Head L450, L460

1 ALLEN KEY for the Bernina Overlock Needle Clamp Screw Hex Head that's in the models L450, L460    

BERNINA

Bernina Machine Front Plastic Pin for Sew Table Fixing 1008 1000 1015 1630 +

    GENUINE BERNINA PIN - Push Fits into the front of your machine This Small white plastic pin is fitted into the front of your machine near the bottom middle for securing the sew table into place Push in type fitting, if your old pin is...

JANOME

Janome Sewing Machine Needle Threader LINK ARM Atelier 6, 7, 9, 550E, MC14000, MC15000, 9450QCP, 5270QDC, CM7P

This is the small plastic LINK ARM which joins the 2 Piece Set Needle Threader Unit This will only fit the models listed or that take this part number  Part No. 858265008 Atelier 6, 7 & 9, 550E, 500E, MC14000, MC15000, MC9400QCP,...

BERNINA

Bernina Overlock Needle Clamp SCREW - L450, L460

    Bernina Overlock Needle Clamp SCREW  1 standard small needle clamp screw hex head type L450, L460 This is a Genuine Bernina Part Part No. 5020700395

HUSQVARNA

Viking Overlocker Needle Plate SCREW - Huskylock S21 & S25

Viking Overlocker Needle Plate SCREW  1 Standard needle plate screw flat top type Fits Viking models - Huskylock S21 & S25  Genuine Part 416427301

PFAFF

Pfaff Needle Plate SCREW - Coverstitch C3.0 & C4.0

Pfaff Coverstitch Needle Plate SCREW  1 Standard needle plate screw flat top type Fits PFAFF models - Coverstitch C3.0 & C4.0 Genuine Part 416427301

BERNINA

Bernina Balance Wheel Release Screw 1008 + 21721283

Bernina Balance Wheel Release Screw 1008 +    Self tapping screw for the plastic balance wheel centre locking wheel to stop the inner unscrewing fully Genuine Bernina Part 21721283 

JUKI

Juki Overlock Needle Clamp SCREW - MO-1000, MO-644, MO-644D, MO-654DE, MO-655, MO-700, MO-735

    JUKI Overlock Needle Clamp SCREW 1 Standard small needle clamp screw flat slot type MO-1000, MO-644, MO-644D, MO-654DE, MO-655, MO-700, MO-735 This is a Genuine Juki Part

COULING

Janome Sew Mini STANDARD FOOT SCREW - John Lewis Sew Mini DMX100 145M 140 Machine Only

STANDARD FOOT SCREW FOR THE JANOME/JOHN LEWIS SEW MINI ONLY   This is the standard foot securing screw for the special plastic sew mini foot   Fits the - Janome SewMini, John Lewis sew mini, Janome DMX100 Petite, Sewmini 140m...

JANOME

Janome Overlock Thread Cone Holder + 8002D AT2000D HD9 1600p

Janome Overlock Thread Cone Holder This is the standard thread holder hold for the full range of Janome overlockers including some listed below Genuine Part No. 784223105 Guaranteed to fit Janome Models:Cover Pro Machines - 1000CP, 1000CPX Cover...

JANOME

Janome Bobbin Case Front Stopper SCREW BLACK

    Janome Bobbin Case Front Stopper SCREW BLACK (Flat Top) Genuine Janome Part  fits on most front bobbin case stopper (fixing screw)  

UNBRANDED

Add on £2.00

This is just for a £2.00 order add on

JANOME

JANOME FOOT HOLDER SHANK SCREW - MC300e MC350e MyLock 1600p - 763048006

JANOME FOOT HOLDER SHANK SCREW  For the MC300e MC350e MyLock 1600p Genuine Part No. 763048006   Janome currently make 4 different type of screws for different models so make sure you select the correct one   This is a Genuine Janome...

SINGER

Singer Sewing Machine Adjustable Base Rubber Foot - 1507 3709 3825 - E1A2503000

    Singer Sewing Machine Adjustable Base Rubber Foot Colour - Grey or Clear Rubber cushion which fit underneath the sewing machine. This fits over the adjusting screw and is typically different to the other base rubbers on the machine...

JANOME

JANOME FOOT HOLDER SHANK SCREW SMALL - 660106001

    JANOME FOOT HOLDER SHANK SCREW SMALL - 660106001   This is the standard small foot holder screw which hold the foot holder in place to clip your feet onto, it will fit some janome machines, janome currently make 3 different type of...

JANOME

JANOME FOOT HOLDER SHANK SCREW LONG - 858274000 CATEGORY D

    JANOME FOOT HOLDER SHANK SCREW LONG - 858274000 CATEGORY D   This is the foot holder screw which hold the foot holder in place to clip your feet onto, it will fit some janome machines, janome currently make 3 different type of...