Fits the Following Models:
Husqvarna VIKING Machines Type - 5, 6 ,7
Which foot is correct for my machine ?
Interchangeable Dual Feed 920219096The Dual Feed foot with changeable presser feet is designed to feed layers of fabric evenly. It is perfect for quilting, sewing velvet, stretch fabrics, imitation leathers and fabrics which need precise pattern matching. Snap on the Changeable Straight Stitch foot. Select the center needle straight stitch. Adjust it up to a maximum stitch length of 6. Snap on the Changeable Zigzag foot and select stitches up to a maximum of 7mm wide and 6mm and long.
How to use the interchangeable dual feed:
- Remove the presser foot ankle by unscrewing the ankle screw.
- Place the Duel Feed foot onto your machine from the back, positioning the fork over the needle clamp screw. Screw the Dual Feed foot onto the presser foot bar with the presser foot ankle screw. Reduce presser foot pressure to 3.
Snap-on and remove the changeable presser foot
- With presser foot bar in the up position, place the presser foot under the Dual Feed foot.
- Push the changeable foot upwards so that it snaps into place.
- To remove the changeable foot, push the front of the foot upwards until the foot snaps off.
How to attach the guide:
The two guides included with the Dual Feed foot will help you sew parallel rows of stitching side by side as in channel quilting or tucking. There is one guide for the left side, and one for the right.
- Insert the guide into the hole in the back of the dual feed.
- Adjust the space between the foot and the guide by pulling it to the left or to the right.
Category:5, 6, 7
Not for: Emerald 122, 118, 116, Eden Rose 250M, Tribute 140M.
1. Snap-on the Adjustable ¼” Foot with Guide.
2. Select a straight stitch, triple straight stitch or the mock hand quilting stitch.
Adjust the needle position as desired if needed.
3. Place the project under the presser foot so that the guide on the foot runs in the ditch of the
seam or along the edge of the fabric. Sew.
NOTE: Red markings on the Adjustable ¼” Foot with Guide help you align the fabric when you
start sewing, at corners and at the end of your fabric.
Topstitching: The Adjustable ¼” Foot with Guide is also
wonderful for topstitching. Adjust the needle position and use
the guide to place your stitching exactly where you want it on
your blocks, garments or home decor projects.
TYPE 5 - PRELUDE™ 360, PRELUDE™ 340,
DAISY™ 335, 330, 325, 320, 315,
310, HUSQVARNA® VIKING® 250,
230, 225/215, 210, 205,
SCANDINAVIA™ 100,
EDEN ROSE™ 250M,
TRIBUTE™ 140M, 145M.
EMERALD™ 122, 118, 116.
TYPE 6 - PLATINUM™ 955 E, 950 E, PLATINUM
™ Plus 775, 770, 755 Quilt,
750 Quilt, 735, 730, 715, ROSE™
605, 600, IRIS™, LILY™ 555, 550,
545, 540, 535, 530, HUSQVARNA®
VIKING® 500, INTERLUDE™ 445,
435, FREESIA™ 425, 415,
HUSQVARNA® VIKING® 400,
350, SCANDINAVIA™ 400, 300,
200, EMERALD™ 203, 183.
DESIGNER JADE™ 35.
JADE™ 20, OPAL™ 650, 670,
TRIBUTE™ 145C, TRIBUTE™
150C.
TYPE 7 - DESIGNER DIAMOND Royale™,
DESIGNER DIAMOND deLuxe™,
DESIGNER DIAMOND™, DESIGNER
SAPPHIRE™85, DESIGNER RUBY Royale™,
DESIGNER RUBY deLuxe™, DESIGNER
RUBY™, DESIGNER TOPAZ™ 50, 40, 30, 25,
20, DESIGNER™ SE, DESIGNER™ SE
Limited Edition, DESIGNER™ I, II,
QUILT DESIGNER™, QUILT DESIGNER™ II,
SAPPHIRE™ 965Q, 960Q, 930, 875Q, 870Q,
855, 850, 835, 830, DESIGNER BRILLANCE™
80, BRILLANCE™ 75Q, OPAL™ 690Q,
EDEN ROSE™ 250C, TRIBUTE™ 140C.
TYPE 8 - DESIGNER EPIC™,
EPIC™ 980Q,
DESIGNER RUBY™ 90.
