Fits the Following Models:
Husqvarna VIKING Machines Type - 1 to 8
Which foot is correct for my machine ?
To bind edges with 1/4" (6 mm) Bias Binding, cut a 1" (24 mm)
wide bias strip of light weight fabric, or use packaged narrow
double fold Bias Binding. Straight stitch, length 2.5, or zigzag or
decorative stitch at desired length.
1. Snap on Bias Binder.
2. Cut the end of the bias tape to a point. Insert the bias tape from the outside of the funnel
guide, into the slot and pull it down under the foot.
3. Place the edge to be bound into the groove on the left side of the funnel guide.
4. Adjust needle position as needed or to adjust the position of the binder funnel/guide,
loosen the screw on the top of the foot and position the funnel guide as needed.
TYPE 1 - ORCHIDEA™, 1250, #1+, 1200,
1100, 1090, 1070, 1070 S, 1050.
TYPE 2 - ORCHIDEA™, 1250, #1+, 1200,
1100, 1090, 1070, 1070 S, 1050.
TYPE 3 - 630, 620, 610, 190, 185,
180, 150, 120.
TYPE 4 - 105, 100, 95, 90.
TYPE 5 - PRELUDE™ 360, PRELUDE™ 340,
DAISY™ 335, 330, 325, 320, 315,
310, HUSQVARNA® VIKING® 250,
230, 225/215, 210, 205,
SCANDINAVIA™ 100,
EDEN ROSE™ 250M,
TRIBUTE™ 140M, 145M.
EMERALD™ 122, 118, 116.
TYPE 6 - PLATINUM™ 955 E, 950 E, PLATINUM
™ Plus 775, 770, 755 Quilt,
750 Quilt, 735, 730, 715, ROSE™
605, 600, IRIS™, LILY™ 555, 550,
545, 540, 535, 530, HUSQVARNA®
VIKING® 500, INTERLUDE™ 445,
435, FREESIA™ 425, 415,
HUSQVARNA® VIKING® 400,
350, SCANDINAVIA™ 400, 300,
200, EMERALD™ 203, 183.
DESIGNER JADE™ 35.
JADE™ 20, OPAL™ 650, 670,
TRIBUTE™ 145C, TRIBUTE™
150C.
TYPE 7 - DESIGNER DIAMOND Royale™,
DESIGNER DIAMOND deLuxe™,
DESIGNER DIAMOND™, DESIGNER
SAPPHIRE™85, DESIGNER RUBY Royale™,
DESIGNER RUBY deLuxe™, DESIGNER
RUBY™, DESIGNER TOPAZ™ 50, 40, 30, 25,
20, DESIGNER™ SE, DESIGNER™ SE
Limited Edition, DESIGNER™ I, II,
QUILT DESIGNER™, QUILT DESIGNER™ II,
SAPPHIRE™ 965Q, 960Q, 930, 875Q, 870Q,
855, 850, 835, 830, DESIGNER BRILLANCE™
80, BRILLANCE™ 75Q, OPAL™ 690Q,
EDEN ROSE™ 250C, TRIBUTE™ 140C.
TYPE 8 - DESIGNER EPIC™,
EPIC™ 980Q,
DESIGNER RUBY™ 90.
