Skip to main content

Free Standing Bobbin Winder + Guide Stand with Automatic Stop Sensor - UK Mains

Was: £59.00
Now: £52.99
(No reviews yet) Write a Review
Shipping:
Calculated at Checkout

Free Standing Auto Bobbin Winder Unit 

with built in platform, spool pin and guide

Automatic bobbin winder for domestic and industrial sewing machine bobbins. Bobbin type 15, 15k, 66, type L etc

including machines like the Janome MB4 & All Brother PR Machines PR600, PR600II, PR620, PR650, PR650E, PR655, PR670, PR1000, PR1000E, PR1050x

 

This bobbin winder machine saves a lot of time when you need to get a big project completed quickly.

Electric bobbin winder can be table mounted, very convenient.

Loosen the screw to adjust the size of the bobbin with sensor full bobbin cut off.

Intelligent control, even winding.

Compact size, easy to carry and store, space saving

UK Mains power

 

Instructions on threading as below

  1. Your thread comes from your cone holder to the auto bobbin winder unit thread guide
  2. Thread through the little hole on the thread guide at the rear of the tension unit and around the tension discs to the following thread guide hole facing the bobbin winder
  3. Place your bobbin onto the winder spindle and wrap your thread around the bobbin several times 
  4. if the bobbin overfills or underfills then adjust the sensor unit using the screws to slide the sensor closer/away 

 

Credit subject to status and affordability. Terms & Conditions Apply. Couling Sewing Machines is a credit broker and is Authorised and Regulated by the Financial Conduct Authority. Credit is provided by Novuna Personal Finance, a trading style of Mitsubishi HC Capital UK PLC, authorised and regulated by the Financial Conduct Authority. Financial Services Register no. 704348. The register can be accessed through http://www.fca.org.uk