Fits the Following Models: Husqvarna VIKING Machines Type - 1 to 8
Which foot is correct for my machine ?
The J foot is used for overcast stitches that stitch to the side and can pucker or curl the fabric to prevent the fabric from curling under.
The tiny wire on the edge of the foot prevents the curling of the fabric edge. Consult the Husqvarna Viking Info display which recommends the J foot for many overedge stitches.
How to use the edging foot J:
- Snap on the Edging foot J.
- Select an overcast or overedge stitch and turn the hand wheel by hand to be sure the needle does not hit the foot. Adjust stitch width as needed.
- Sew
TYPE 1 - ORCHIDEA™, 1250, #1+, 1200,
1100, 1090, 1070, 1070 S, 1050.
TYPE 2 - ORCHIDEA™, 1250, #1+, 1200,
1100, 1090, 1070, 1070 S, 1050.
TYPE 3 - 630, 620, 610, 190, 185,
180, 150, 120.
TYPE 4 - 105, 100, 95, 90.
TYPE 5 - PRELUDE™ 360, PRELUDE™ 340,
DAISY™ 335, 330, 325, 320, 315,
310, HUSQVARNA® VIKING® 250,
230, 225/215, 210, 205,
SCANDINAVIA™ 100,
EDEN ROSE™ 250M,
TRIBUTE™ 140M, 145M.
EMERALD™ 122, 118, 116.
TYPE 6 - PLATINUM™ 955 E, 950 E, PLATINUM
™ Plus 775, 770, 755 Quilt,
750 Quilt, 735, 730, 715, ROSE™
605, 600, IRIS™, LILY™ 555, 550,
545, 540, 535, 530, HUSQVARNA®
VIKING® 500, INTERLUDE™ 445,
435, FREESIA™ 425, 415,
HUSQVARNA® VIKING® 400,
350, SCANDINAVIA™ 400, 300,
200, EMERALD™ 203, 183.
DESIGNER JADE™ 35.
JADE™ 20, OPAL™ 650, 670,
TRIBUTE™ 145C, TRIBUTE™
150C.
TYPE 7 - DESIGNER DIAMOND Royale™,
DESIGNER DIAMOND deLuxe™,
DESIGNER DIAMOND™, DESIGNER
SAPPHIRE™85, DESIGNER RUBY Royale™,
DESIGNER RUBY deLuxe™, DESIGNER
RUBY™, DESIGNER TOPAZ™ 50, 40, 30, 25,
20, DESIGNER™ SE, DESIGNER™ SE
Limited Edition, DESIGNER™ I, II,
QUILT DESIGNER™, QUILT DESIGNER™ II,
SAPPHIRE™ 965Q, 960Q, 930, 875Q, 870Q,
855, 850, 835, 830, DESIGNER BRILLANCE™
80, BRILLANCE™ 75Q, OPAL™ 690Q,
EDEN ROSE™ 250C, TRIBUTE™ 140C.
TYPE 8 - DESIGNER EPIC™,
EPIC™ 980Q,
DESIGNER RUBY™ 90.
