Brother V Series Upgrade Kit
Increases the embroidery size to 300x200mm, adds line break on embroidery lettering and also includes 30 new embroidery designs.
The UGKV1 includes :-
- XE5068101 (200x200mm frame)
- XE5071001 (300x200mm frame)
- Line break on embroidery letters
- 30 Embroidery patterns
Software Upgrade Note: An internet connection is required to run the software upgrade.
Technical Bulletin
We have seen an increase in customers wrongly downgrading their machine during the installation process for UGKV1.
The installation wizard is 3.03, downgrading from a later version could damage the machine.
All DHL stock has been reworked with the below label on the front of the box Should you have stock without this label attached you can either print out the label above and attach to the box or contact ukcustomersupport@brothersewing.eu and we will provide labels to you.
The installation wizard for upgrade kit 1 UGKV1 has firmware version 3.03.
If your Version number is 3.03 or higher then you do not need to update the machine from the installation wizard to use your new upgrade kit.
To check the version of your machine, press the settings page on the machine.
for the latest firmware for your machine please visit the relevant link for your machine as installing a previous version could harm your machine.
V3 https://support.brother.com/g/b/producttop.aspx?c=gb&lang=en&prod=hf_inovv3euk
V5 https://support.brother.com/g/b/producttop.aspx?c=gb&lang=en&prod=hf_inovv5euk
V7 https://support.brother.com/g/b/producttop.aspx?c=gb&lang=en&prod=hf_inovv7euk
